Portal Type Rail Travelling Pay-off &Take-up with Traverse PN1250-PN3150

1.Main  Despriction:

• Payoff & take up place on linear rail, each pillar can move individual or synchronized quickly to adjust space to avoid the cable bending or deformation.
• Loading & unloading bobbin controlled by motor.
• Suitable for bigger cable or tube on bobbins with different diameter and sizes.
• Operate both individual and can be connected with extruder.
• Tension of cable or tube can keep steady from start to end, also can adjust by control system.
• Cable or tube keep straight, bobbin moving on linear rail.
• HMI + PLC control system for pre-setting traversing pitch and for bobbin speed control.
• Various of payoff and takeup tension control options.
• Cable moving guider traverse can be variable frequency motor or servo motor drive.

2. 1250/2500 portal type no driving pay off

• Pay off type : upper beam type portal pay off
• Bobbin:Φ1250--Φ2500mm
• Bobbin width:950mm-1900mm
• Loading weight:12T
• Cable diameterLΦ10-70mm
• Traveling motor:BWED121-35×17-1.5kw(AC)
• Lifting motor:BLD11-23-1.5kw(AC 2 sets)
• Clamp motor:Y90L-6-B5-1.1kw 960rpm（AC）
• Pay off tension control way: manual disc type brake
• Low volt electrical component: Siemens brand
• Structure:
• The machine is of gantry traversing type, with lower-mounted casing-pipe. The gantry frame is made by bending and welding. The two tail-centers of wire reel are moved up/down by feed screw nut driven by two motors via cycloid speed reducer. Each tail-block can move by itself, or the center-blocks can move simultaneously. Double protective device (M+E) is also equipped. When necessary, it can also be equipped with tail-spindles with various specifications, so as to meet installation requirement for wire reels with various specifications. The clamping of wire reel is realized by the motor above the casing-pipe and speed-reduction by chain wheel. It is also equipped with clamping overload-skid protection. Pay off tension control way untilizes the manual disc type brake.